The Pool Resurfacing Specialist
Call Us Today For Your Free Estimate 727.321.3996
“When you need action, call Action Pool”
THE FIBERGLASS RESURFACING PROCESS…..
First: We start by grinding and/or acid washing and neutralizing the surface to make it smooth. All the cracks and voids are filled and seal lines are cut around all of the fittings and accessories.
Second: The bond lock coat is applied. This is applied so the marcite will be sealed (like a primer coat).
Third: The first coat of resin is carefully applied.
Fourth: A layer of 1oz Owens Corning fiberglass mat is hand-laid with overlap of 3 to 6 inches while the first coat of resin is still damp. Hand laid mat assures consistent thickness and color which gives the finished product strength and flexibility.
Fifth: The second layer of resin is applied and ribbed rollers are used to smooth the fiberglass coating into the contours of the surface.
Sixth: The surface is sanded to remove any sharp points, and a third coat of resin is applied. This is the layer that gives the fiberglass surface it’s non-porous finish.
Seventh: Add non-slip texture to steps/bench and/or swim outs
Please feel free to contact Action Pool Inc with any questions you may have in regard to this process.
lnk